- Self-Leveling Screed -

Novoplan 257

Novoplan 257 is used in interiors for levelling and smoothing di erences in thicknesses from 1 mm to 10 mm on new or existing substrates, preparing them to receive flooring where a high resistance to loads and trac is required. Novoplan 257 is especially suitable for areas subject to wheeled service loads such as chairs and trolleys.Classified as CT-C25-F7 according to EN 13813.Novoplan 257 is for interior use only. Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres.

Technical Specifications

• Mixing ratio: 21-22 parts water per 100 parts by weight of Novoplan 25
• Application: Brush or by spray
• Storage: 24 months. Protect from frost
• Consumption : 0.1-0.2 kg/m2 depending on use
• Packaging: 25-10-5 kg drums and 12×1 kg packs

 

Primer G

Dilute primer G with water from 1:1 to 1:3 to protect old floors before levelling. Also, to fix the residual dusting and provide even absorption of the substrates prior to levelling or laying.

Technical Specifications

• Mixing ratio: 21-22 parts water per 100 parts by weight of Novoplan 257
• Thickness per coat: From 1 to 10 mm
• Pot life: 20-30 minutes
• Setting time: 45-60 minutes
• Set to light foot traffic: 3-4 hours
• Waiting time before subsequent bonding: 24-48 hours
• Colour: grey
• EMICODE: EC1 R PLUS – very low emission
• Consumption: 1.6 kg/m² per mm of thickness
• Packaging: 25 kg bags/li>
• Storage: 12 months in a dry place in original packing/li>

Ultraplan Eco20

Ultraplan eco 20 is used in interiors for levelling and smoothing differences in thicknesses. Ranging from 1mm to 10mm on new or existing substrates, preparing them to receive flooring where a high resistance to loads and traffic is required.

Note – Ultraplan Eco 20 is for interior use only. Typical applications would include use in hospitals, hotels, theatres, schools and shopping centres.

 

 

Technical Specifications:

• Mixing ratio: 24-25 parts water per 100 parts by weight of Ultraplan Eco 20
• Thickness per coat: From 1 to 10 mm
• Pot life: 20-30 minutes
• Setting time: 45-60 minutes
• Set to light foot traffic: 3-4 hours
• Waiting time before subsequent bonding: 24-48 hours
• Colour: grey
• EMICODE: EC1 R PLUS – very low emission
• Consumption: 1.6 kg/m² per mm of thickness
• Packaging: 23 kg bags
• Storage: 12 months in a dry place in original packing